I have the Burner Superfast. It took me a few months to figure out, but I
stuck with it and now I like it.
I won it in a raffel, so being free had me give it time,,lol. ?
Dude I wouldn’t shorten it. Since it’s so long and light, just shortening
it by an inch could wipe out any forgiveness in the club, and especially if
you are an amateur, you could end up slicing it a lot?
Mark, I’m thinking about getting the Superfast 2.0, could I get it cut down
a couple of inches? Or would that affect the balance of a club??
Vid just loads until 2:11 :(((?
Protip for people with the Burner: choke down on the club about an inch or
an inch and a half. much much much easier to control
Mark, these reviews/comparisons are really lackluster for me. This is
because you complain about launch and length and the grip of all things on
the TM, however if you were to do an unbiased review you would get the same
shafts in both (not OEM made for rubbish) and could have them whatever
length you want so that you are purely reviewing the heads.
I have the 2.0 and it has definitely been something hard to figure out, I
am actually getting the ping I20 on friday, fell in love with my first swing
I have the 2.0 and I love the long driver. I hit both clubs long but I hit
the 2.0 a lot more better.
hello mark, could you compare Titleist 910 D2 vs Png G20 vs TaylorMade
Burner 2.0 thanks in advance!!!! Kush….
Yeah. the same happened to me
i love the taylor made burner burner 2.0 ever since i got it i’ve been
driving nearly 300 yards!!
top man mark.your vids are great for us out there.keep up the good
work.many thanks.
Trackman
Is that right? Yea beacuse you were there weren’t you. If you want proof
ask youtube user cian389, he was there. So f**** off Hugo mate
@itubeutude true
Why do they make it so long?
i think he uses titleist d2/3 or the nike vr pro l.e
same here
what driver do you use?
I have the g20. I have stiff shaft and 9.5 degree. My burner superfast was
regular shaft and 10.5 degree. G20 is more forgiving and hits same distance
as the burner
Is it better than the G15? Thanks for the vids. Burner makes my ears ring
on the range!
ur gay
Agree re the length of the Burner. It’s the only way left to claim extra
distance but in my opinion people would be better off with a 45″ or less
driver like the 910. Fairways over an added 10 yards offline wins every day
of the week.
another great vid mark.im going to buy one of these drivers next month.have
only hit the ping at a fitting day and it went very high.im yet to hit the
burner,though i like the idea of a lower flight.keep up the good work.
got the ping g20 driver and the taylormade burner but taylormade 3 wood
ping brilliant love it taylormade is to long agred with you but hit it
about 220 off the tee love it but took a while to get used to 🙂
I have the Burner Superfast. It took me a few months to figure out, but I
stuck with it and now I like it.
I won it in a raffel, so being free had me give it time,,lol. ?
Dude I wouldn’t shorten it. Since it’s so long and light, just shortening
it by an inch could wipe out any forgiveness in the club, and especially if
you are an amateur, you could end up slicing it a lot?
Mark, I’m thinking about getting the Superfast 2.0, could I get it cut down
a couple of inches? Or would that affect the balance of a club??
Vid just loads until 2:11 :(((?
Protip for people with the Burner: choke down on the club about an inch or
an inch and a half. much much much easier to control
Mark, these reviews/comparisons are really lackluster for me. This is
because you complain about launch and length and the grip of all things on
the TM, however if you were to do an unbiased review you would get the same
shafts in both (not OEM made for rubbish) and could have them whatever
length you want so that you are purely reviewing the heads.
I have the 2.0 and it has definitely been something hard to figure out, I
am actually getting the ping I20 on friday, fell in love with my first swing
I have the 2.0 and I love the long driver. I hit both clubs long but I hit
the 2.0 a lot more better.
hello mark, could you compare Titleist 910 D2 vs Png G20 vs TaylorMade
Burner 2.0 thanks in advance!!!! Kush….
Yeah. the same happened to me
i love the taylor made burner burner 2.0 ever since i got it i’ve been
driving nearly 300 yards!!
top man mark.your vids are great for us out there.keep up the good
work.many thanks.
Trackman
Is that right? Yea beacuse you were there weren’t you. If you want proof
ask youtube user cian389, he was there. So f**** off Hugo mate
@itubeutude true
Why do they make it so long?
i think he uses titleist d2/3 or the nike vr pro l.e
same here
what driver do you use?
I have the g20. I have stiff shaft and 9.5 degree. My burner superfast was
regular shaft and 10.5 degree. G20 is more forgiving and hits same distance
as the burner
Is it better than the G15? Thanks for the vids. Burner makes my ears ring
on the range!
ur gay
Agree re the length of the Burner. It’s the only way left to claim extra
distance but in my opinion people would be better off with a 45″ or less
driver like the 910. Fairways over an added 10 yards offline wins every day
of the week.
another great vid mark.im going to buy one of these drivers next month.have
only hit the ping at a fitting day and it went very high.im yet to hit the
burner,though i like the idea of a lower flight.keep up the good work.
got the ping g20 driver and the taylormade burner but taylormade 3 wood
ping brilliant love it taylormade is to long agred with you but hit it
about 220 off the tee love it but took a while to get used to 🙂